Toll Free Phone: 800-627-0266        Phone: 979-282-2861

Dorian Tool International Incorporated

Facing - Steps

Step1

First Grooving Cut

Plunge to first depth of cut
inside the safe first cut zone
specified in the catalog for
each modular toolholder.


 

Step 2.

First Roughing Cut

Enter the safe zone and
continue to cut in the opposite
direction as step no 2 to cut to desired dimension. Then pull away .010″ (.25mm) at a 45º angle and retract tool.


 

Step 3.

Second Roughing Cut

Feed across the desired
dimension. Then pull away .010″ (.25mm) at a 45º angle and
retract tool.


 

Step 4.

Multi Turning Roughing Cut

Repeat steps 1-3 until
roughing is complete.


 

Step 5.

Finish Depth of Cut

Plunge to the finished
dimension at each corner
to provide a relief allowing
the tool to flex into position.

 


Step 6.

First Finishing Cut

Cut inner side and the bottom
of the face groove.


Step 7.

Final Finishing Cut

Finish outer side.

 

Translate »