Toll Free Phone: 800-627-0266        Phone: 979-282-2861

Dorian Tool International Incorporated

KOOL-Cut Modular

Kool-Cut Modular Turning & Grooving

The Double Jet Coolant System is designed with the coolant exiting from 2 outlets, above and below the insert cutting edge. Above the insert cutting edge, the coolant is aimed precisely between the cutting edge of the insert and the chip.

Below the insert cutting edge, the coolant is aimed under the insert cutting edge and the workpiece surface. With the combination of the 2 Coolant Jets, the friction of the cutting edge is reduced, the insert cutting edge is kept clean and at a constant temperature, reducing edge wear and chipping.

Consequently, the surface finish, work quality and tolerances are improved and the life of the insert is extended up to 100% over the conventional coolant system.


 

TURNING

FACING

GROOVING

 

BORING & GROOVING


 

Serrated Locking System

Interchangeable Shanks Sizes & Cartridge Styles

The 90° serrated wall of the Shank allows the cartridge to be locked on, with precise and repetitive accuracy, and rigidity.

 

Straight Toolholder Style
90° Gang Toolholder Style

3 Inch Sizes;
3/4″, 1.0″, 1 1/4″
3 Metric Sizes;
20mm, 25mm, 32mm

2 Cutting Direction Style:
Right Hand and Left Hand

Double Jet Coolant Inlet:
Rear Inlet and Bottom Inlet

 

 

Kool Cut - Parts

 

KOOL Cut™ QUICK CHANGE TURNING, FACING & GROOVING SYSTEM

KOOL CUT SHANKS-HEDAS INFO


SEC F KOOL CUT Modular 2016-COVER CATALOG

CATALOG

Turning and Grooving-Metric

PROMOTION – METRIC

Turning and Grooving-INCH

PROMOTION – INCH


Translate »