TOOLHOLDERS
Designed with the coolant exit in 2 outlets, above and below the insert cutting edge.
With the Thru Coolant Dor-Lock™ Clamp
located above the insert cutting edge, the coolant is injected precisely between the cutting edge of the insert and the chip.
Below the insert cutting edge, the coolant is injected under the insert cutting edge and the work piece surface.
The combination of the 2 Coolant Outlets
reduces the friction on the insert cutting edge and keeps it clean at a constant temperature, reducing edge wear and chipping.
Consequently, the surface finish, work quality and tolerances are improved and the life of the insert is extended up to 200% over the conventional coolant system.

HOW IT WORKS?
BORING BARS
Designed with the coolant exit in 2 outlets, above and below the insert cutting edge.
With the Thru Coolant Dor-Lock™ Clamp located above the insert cutting edge, the coolant is injected precisely between the cutting edge of the insert and the chip.
The Chip Flush Coolant Outlet located below the insert on the front of the bar , flushes chips out of the way so that they do not get packed or re-cut, by simply installing the supplied coolant nozzle screw.
The combination of the 2 Coolant Outlets Reduces the friction on the insert cutting edge and keeps it clean at a constant temperature, reducing edge wear and chipping.
HOW IT WORKS?
CATALOG
VIDEO